Features1. Medium strength2. Fluoresces to allow quality control and inspection3. Prevents unwanted movement, loosening, leaks and corrosion4. Resists vibration5. Seals threads - allows through-hole tapping6. For following M36 thread locking and sealing
7. Prevents loosening on vibrating assemblies, e.g. pumps, gearboxes, or presses.
8. Works on all metals, including passive substrates (e.g. stainless steel, aluminium, plated surfaces)
9. Proven to tolerate minor contamination by industrial oils, e.g. engine oils, corrosion prevention oils, and cutting fluids
10. Permits disassembly with hand tools for servicing
Technical Information
|
Chemical Compound
|
Methacrylate
|
|
Colour
|
Blue
|
|
Fixture Time
|
5.0 - 15.0 min.
|
|
Key Characteristics
|
Thixotropic
|
|
Substrates
|
Metal: Brass, Metal: Steel, Metal: Steel - Stainless Steel
|
|
Viscosity
|
1200/1500mpa.s
|
|
Packing Type
|
Bottle
|
|
Physical Form
|
Liquid
|
Application1, General, thixotropic viscosity.2, For M6 ~ M20 thread locking and sealing.3, Can be used for ordinary tools to disassemble, and has some lubrication to the load clamping precision.
How to use
1) Cleaning thread surface with high efficiency detergent;
2) In the bolt, nut, screw hole dispensing, suggest gluing at least above 3 buttons;
3) Assembling bolt, nut and tighten to the specified torque;
The ordinary glue lock is used and the spanner can be disassembled. If the high strength glue lock is used, the spanner can not be directly disassembled. At this time, the bolt and nut should be heated to 260 degrees, and the heat can be disassembled.
The ordinary glue lock is used and the spanner can be disassembled. If the high strength glue lock is used, the spanner can not be directly disassembled. At this time, the bolt and nut should be heated to 260 degrees, and the heat can be disassembled.How to choose it ?
HiGlue Thread locker Anaerobic adhesive: 222 242 243 262 263 270 271 272 277 290
A thread locker is an anaerobic adhesive used on threaded metals that cures at room temperature in the absence of air. The adhesive completely fills the gaps between mating threads to lock and seal the threaded assembly.
|
|
|
|
|
|
|
|
Fixture time/
Fullcure time
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Benefits of using HiGlue Thread locks
* Locks mating threads to prevent loosening from vibration & shock
* Seals against fluids & corrosion
* Provides lubricity to achieve controlled torque during assembly
* Works on active metals (e.g., brass, copper) as well as passive metals (e.g., stainless steel, plated surfaces)
* Resists extreme temperatures
* Applies easily and cures rapidly.
When choosing a thread locker, there are four things to consider:
1. Strength
Low Strength (Purple): Ideal for fasteners <1⁄4" (6 mm). Easy disassembly using hand tools
Medium Strength (Blue): Designed to be removable with standard hand tools on 1⁄4" to 3⁄4" fasteners, like 242 243 262 263
High Strength (Red): Designed to deliver high strength on 1⁄4" to 3⁄4" (6 mm to 22 mm) fasteners. For removal, it may require localized heat (>550°F/260°C), hand tools, and disassembly while hot, like 271 272 290
2. Viscosity
Liquid Formulas: Everyday assembly; ideal for fine threads and blind holes
Semisolid Formulas: Pocket-friendly, ideal for overhead applications
Tape Formula: Pocket-friendly; controlled application; can be pre-applied several days before assembly
3. Application Methods
Pre-Applied: QuickTape threadlocker can be applied beforehand on bolts that are waiting to be assembled
Pre-Assembly: Most HiGlue liquid threadlockers are designed to be applied at the moment that can be assembled
Post-Assembly: Wicking grade formula can be applied on parts that are already assembled
4. Materials Being Assembled
All HiGlue Thread lockers: Metal-to-metal applications
