OBDII FUNCTION

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS) | Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve.
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Fuel Pump activation | Activate it when replace a new one.
Air Filter | Self-learning process after replacing the air filter.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
Air Suspension | Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off
ACS (Air Conditioner) | Function supports routine maintenance of air condition modules. Air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
Head Lamp | Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding | relearn the injector control parameter while the injector renewed or replaced.
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests.

Applies to most of the models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft FR V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.

Coverage for Alfa Romeo

Coverage for Citroën

Coverage for Dacia

Coverage for Fiat

Coverage for Peugeot

Coverage for Renault

PRODUCT DETAILS DISPLAY

CONTENTS

• iCarsoft FR V3.0 scantool
• TF card with diagnostic software for Abarth, Alfa Romeo,
• Citroen, Dacia, Lancia, Fiat, Peugeot and Renault
• OBDII cable
• User manual
• PC connecting cable
• Nylon carry case